Heavy vehicle technician cost is what your labor rate should be built on: the wage, the payroll taxes, the benefits, and the hours that tech actually bills. A lot of semi truck repair labor rates get built a different way. The owner calls the shop across the highway, pretends to be a driver with an air leak, and writes down whatever they quote.
(Every owner who does this thinks they’re the first. The shop across the highway called you last spring.)
This post is for heavy-duty and diesel shop owners setting or raising a rate. It turns what a tech costs you into what an hour should cost your customer, using published numbers where they exist and labeled math where they don’t.
Full disclosure: I run WickedFile. It doesn’t set labor rates. It reads your parts invoices, core charges, and credit memos and flags the credits that never came back, which matters more to a diesel shop’s margin than most rate debates. The rate math below works fine on a napkin.
Semi truck repair labor rates in 2026: what the published numbers say
If you want to know where the typical heavy-duty truck repair labor rate or diesel mechanic labor rate sits, two sources publish data you can actually open and read.
Fullbay’s State of Heavy-Duty Repair. Fullbay, which makes heavy-duty shop software, says it sampled more than 3,400 shops across North America, Australia, and New Zealand. Its numbers: a median labor rate of $135 at the start of 2024, $145 by early 2025, and $149 now.
Paar Melis’s 2025 benchmark report. Paar Melis is a CPA firm that works with repair shops, and its figures come from client financials for 2024. The general and diesel shops in its client base averaged a $179 labor rate. General and import shops averaged $163.
Don’t average those two. Fullbay’s report is about heavy-duty repair and includes shops outside the US. Paar Melis labels its group “General / Diesel” and draws it from its own repair-shop clients. They’re measuring different shops, and both are fair reference points.
Neither one is your rate. Your rate comes from your costs.
Heavy vehicle technician cost is more than the wage
Start with the wage. O*NET’s page for bus and truck mechanics and diesel engine specialists, built on Bureau of Labor Statistics 2025 data, shows a median of $29.70 an hour, or $61,770 a year, across about 316,000 workers.
Then add what you pay on top of the paycheck. The IRS sets the employer share of Social Security at 6.2% and Medicare at 1.45%, so 7.65% before anything else.
Here’s an illustrative heavy-duty tech, a little above the national median:
| Cost | Annual |
|---|---|
| Wage: $32/hour × 2,080 paid hours | $66,560 |
| Employer Social Security and Medicare (7.65%) | $5,092 |
| Health insurance, workers’ comp, PTO, training, uniforms (illustrative) | $14,000 |
| Total cost of the tech | $85,652 |
Your “other” line will be different. Workers’ comp on heavy-duty work and family health coverage can each move it a lot. Put your real numbers in.
That $85,652 is the easy part. The hard part is how many hours you can bill against it.
Turn heavy vehicle technician cost into a labor rate
Divide the tech’s total cost by the hours he actually bills, not the hours he’s on the clock.
Same tech, same $85,652, two illustrative versions of the year:
| Bills 70% of paid hours | Bills 55% of paid hours | |
|---|---|---|
| Billed hours per year | 1,456 | 1,144 |
| Tech cost per billed hour | $58.83 | $74.87 |
| Rate needed for a 60% labor gross profit | $147 | $187 |
The 60% target isn’t random. Paar Melis’s general and diesel shops averaged a 58.6% labor gross profit in its 2025 report.
Look at what moved. Not the wage. Not the benefits. Fifteen points of billed hours changed the rate you need by $40 an hour.
That’s why the Fullbay median and the Paar Melis average can both be “right.” A shop billing 70% of its tech hours can live near $149. A shop billing 55% needs something closer to $187 just to hold the same labor margin. For what it’s worth, Paar Melis’s general and diesel shops averaged 58.5% productivity by its measure, which counts billed hours against total available hours.
Heavy-duty work has its own ways of eating billed hours:
- Road calls. The drive out and back ties up a tech and a service truck. Fullbay’s report says almost half the industry charges an hourly trip charge for every call-out. If you don’t, the drive time comes out of your labor margin.
- Waiting on parts. A truck on the lift waiting for a part is a bay producing nothing.
- Diagnostic time that doesn’t get billed. A long electrical chase written up as one hour is several hours of cost billed at one.
This post sticks to the heavy-duty side. For the full general method (overhead per billed hour, target margin, market check), see how to calculate the right labor rate. For the gap between the rate you post and the rate you collect, see effective labor rate.
Diesel shops keep less of every parts dollar than car shops do
Here’s the number heavy-duty owners don’t argue about at the counter, because the customer never sees it.
In Paar Melis’s 2025 report, general and diesel shops averaged a 41.8% parts gross profit. General and import shops averaged 46.6%. The diesel group also had the highest average repair order of the three shop types in the report, at $1,339.
Some of that gap may be pricing. Heavy-duty parts carry big prices, and a shop may choose a lower markup on them. But some of it can be is parts that never get paid for twice: cores that went back and never got credited, returns with a slip and no credit memo, and parts bought for a repair order that never made it onto the invoice.
You can’t tell which part of the gap is which without reconciling. Here’s why it’s worth finding out. Illustrative math for a six-tech shop:
- Parts sales: $70,000 a month.
- Close half the gap to the general-shop average: 2.4 points, or about $1,673 a month.
- Billed labor hours: 6 techs × 1,456 hours ÷ 12 = 728 a month.
- $1,673 ÷ 728 hours = $2.30 an hour.
Recovering that parts margin is worth the same as a $2.30 rate increase. No fleet manager will ever push back on it, because none of it shows up on their invoice.
Heavy-duty makes this worse in one specific way: cores. Turbos, injectors, transmissions, and reman engines all carry core charges, and they’re big ones. One uncredited core can wipe out the margin on the whole job. The full mechanics are in where core charge money leaks.
”We’ve always done it this way” is how a diesel rate falls behind
Most rates I see weren’t calculated. They were inherited. The rate went up $5 or $10 when somebody remembered, usually in January, usually after checking what the competition charges.
Fullbay’s report shows how common that is. Just over half of heavy-duty shops assess their rate once a year, 34% more often, and 12% don’t look at it at all. Another 34% believe they charge $10 or more less than nearby competitors.
That’s a lot of shops pricing from the shop across the road instead of from their own costs. And the shop across the road is pricing from you.
Doing it the way you’ve always done it is fine when nothing changes. In heavy-duty, wages, insurance, and parts prices move every year. Here’s a once-a-year routine that takes about an afternoon:
- Pull each tech’s total cost for the last 12 months: wages, payroll taxes, benefits, training.
- Pull billed hours per tech from your shop management system.
- Divide cost by billed hours. That’s your real tech cost per billed hour.
- Divide by 0.40 (for a 60% labor gross profit) to see the rate that cost requires.
- Compare it with your posted rate and your effective rate. If the required rate is higher than what you collect, a rate increase is overdue.
- Check parts gross profit by vendor. If it’s well under where you price, find out why before you raise labor.
If you’re choosing or changing the software that holds the billed-hour data, truck shop management software compares the heavy-duty platforms. If pay plans are part of the rethink, flat-rate technician pay plans covers how they change the cost side.
A higher labor rate can’t cover parts credits you never got
Raising your rate is the right move when the math says so. It just won’t fix a core credit that never landed. That’s the part WickedFile handles.
What it reads: your parts invoices, credit memos, and vendor statements. It also pulls repair orders from your shop management system, entries from QuickBooks Online, and bank and card transactions through Plaid.
What it flags for a heavy-duty shop:
- Core charges with no matching core credit.
- Returns with a slip but no credit memo, and credits issued but not applied on the statement.
- Parts bought for a repair order that never got sold on it.
- Card purchases from a parts counter, like a road-call part bought on the company card, with no invoice behind them.
- Statement lines with no supporting invoice.
How to use the free trial on this problem: you get 500 scanned pages, no credit card. Take last month’s invoices, credit memos, and statements from your biggest heavy-duty parts supplier and your reman or core-heavy vendor. Run them through and compare the uncredited cores against the $2.30-an-hour math above, using your own numbers.
What it doesn’t do: it doesn’t set your labor rate, track technician time, or run payroll. It isn’t a shop management system, it doesn’t replace QuickBooks or your bookkeeper, and it isn’t a payment processor. After the trial, the Grow plan is $299 a month, flat. If you buy from two vendors and track every core on a whiteboard that actually gets checked, you may not need it.
Run your core credits through the free trial →
Build the rate from your own costs, collect the core credits you’re owed, and the next time you call the shop across the highway, do it to say hello. They already know your rate anyway.
