Most shops set their labor rate the same way they pick a lunch spot: whatever the guy down the street is doing, plus or minus ten bucks. (I’ve seen it on whiteboards. I’ve seen it on napkins. Once, on the back of a core return tag.)
The average auto repair labor rate in the U.S. runs from about $132 to $165 per hour in 2026. The low end is Tekmetric’s average across 10,000+ shops on its platform. The high end is from accounting firm Paar Melis, built from client shops’ actual 2024 financials. Which one is “right” depends on which shops you compare yourself to, and we’ll get to that.
This guide is for the owner setting the number on the wall, not the customer trying to talk it down. You’ll get shop rates and technician pay for every state, a calculator for your own rate, and the reason your posted rate and your collected rate are probably two different numbers.
The average shop labor rate is $132 to $165 an hour
Two good datasets, two different answers. Here’s why.
Tekmetric averages the rates of more than 10,000 shops on its software and lands at $132. That’s a big, broad sample. It doesn’t say whether those are posted or collected rates, or how many shops each state includes.
Paar Melis is a CPA firm that specializes in auto repair. Its 2025 benchmark report averages its clients’ actual P&Ls and lands near $165. Those are real books, but they’re shops organized enough to hire an industry accountant, which probably skews the average up.
The surveys sit in between and spread wide. In the 2026 Ratchet+Wrench Industry Survey of 430+ shops, a quarter posted $150 or more, and about 40% posted under $110.
Here’s Paar Melis’s breakdown by region and shop type:
| Region or shop type | Average labor rate |
|---|---|
| Midwest | $157 |
| Southeast | $165 |
| Northeast | $166 |
| West | $171 |
| Southwest | $177 |
| Diesel shops | $179 |
| European specialists | $181 |
Two things jump out.
First, the specialists earn their premium. European and diesel shops average roughly $15 above Paar Melis’s overall figure, because the tooling, scan subscriptions and training aren’t cheap. If you’re a general shop charging European-shop rates, you’d better have the reputation to back it up.
Second, and this should change how you read the rest of this post: Paar Melis’s top 10% of shops and bottom 10% charge almost the same rate, about $163 to $164. The top shops just keep ten more points of labor gross profit (65.9% versus 55.6%). Hold that thought. We’ll come back to it.
Average Auto Repair Labor Rates by State (2026)
You’ll find plenty of “labor rate by state” tables online. I went looking for where their numbers come from and mostly found other tables, several of them copying a 2021 per-repair cost study that was never about hourly rates.
The table below uses the two state-level sources I could actually trace. Tekmetric’s average shop rate is what shops on its platform charge. The BLS technician wage is what you’ll pay to staff the bays, and it’s the biggest cost behind your rate. Read them together: a state with high tech wages and a low average rate is a state full of shops that are probably undercharging.
| State | Average shop labor rate (Tekmetric) | Median tech wage (BLS) | Wage vs. U.S. median | Tech cost per billed hour* |
|---|---|---|---|---|
| Alabama | $124 | $21.94 | −10% | $35.10 |
| Alaska | $161 | $29.25 | +20% | $46.80 |
| Arizona | $145 | $23.83 | −2% | $38.13 |
| Arkansas | $116 | $21.23 | −13% | $33.97 |
| California | $156 | $31.24 | +28% | $49.98 |
| Colorado | $151 | $29.46 | +21% | $47.14 |
| Connecticut | $141 | $28.95 | +19% | $46.32 |
| Delaware | $141 | $28.08 | +15% | $44.93 |
| District of Columbia | n/a | $33.01 | +36% | $52.82 |
| Florida | $138 | $23.20 | −5% | $37.12 |
| Georgia | $137 | $23.59 | −3% | $37.74 |
| Hawaii | $142 | $25.08 | +3% | $40.13 |
| Idaho | $136 | $23.28 | −4% | $37.25 |
| Illinois | $135 | $23.64 | −3% | $37.82 |
| Indiana | $123 | $23.73 | −3% | $37.97 |
| Iowa | $123 | $24.28 | 0% | $38.85 |
| Kansas | $120 | $22.98 | −6% | $36.77 |
| Kentucky | $126 | $21.58 | −11% | $34.53 |
| Louisiana | $132 | $22.31 | −8% | $35.70 |
| Maine | $110 | $25.02 | +3% | $40.03 |
| Maryland | $141 | $27.66 | +14% | $44.26 |
| Massachusetts | $133 | $29.21 | +20% | $46.74 |
| Michigan | $130 | $26.02 | +7% | $41.63 |
| Minnesota | $137 | $28.07 | +15% | $44.91 |
| Mississippi | $125 | $18.18 | −25% | $29.09 |
| Missouri | $120 | $23.63 | −3% | $37.81 |
| Montana | $135 | $28.24 | +16% | $45.18 |
| Nebraska | $127 | $24.31 | 0% | $38.90 |
| Nevada | $152 | $23.22 | −5% | $37.15 |
| New Hampshire | $128 | $28.38 | +17% | $45.41 |
| New Jersey | $140 | $27.22 | +12% | $43.55 |
| New Mexico | $141 | $22.74 | −7% | $36.38 |
| New York | $125 | $26.02 | +7% | $41.63 |
| North Carolina | $123 | $23.17 | −5% | $37.07 |
| North Dakota | $135 | $27.58 | +13% | $44.13 |
| Ohio | $125 | $23.42 | −4% | $37.47 |
| Oklahoma | $129 | $22.38 | −8% | $35.81 |
| Oregon | $150 | $28.14 | +16% | $45.02 |
| Pennsylvania | $115 | $23.94 | −2% | $38.30 |
| Rhode Island | $134 | $24.89 | +2% | $39.82 |
| South Carolina | $130 | $23.12 | −5% | $36.99 |
| South Dakota | $120 | $24.60 | +1% | $39.36 |
| Tennessee | $127 | $24.18 | −1% | $38.69 |
| Texas | $141 | $23.23 | −5% | $37.17 |
| Utah | $135 | $22.39 | −8% | $35.82 |
| Vermont | $110 | $24.82 | +2% | $39.71 |
| Virginia | $136 | $28.53 | +17% | $45.65 |
| Washington | $152 | $27.54 | +13% | $44.06 |
| West Virginia | $100 | $18.11 | −26% | $28.98 |
| Wisconsin | $125 | $26.13 | +7% | $41.81 |
| Wyoming | $134 | $24.68 | +1% | $39.49 |
Average shop labor rate: Tekmetric, “Average Auto Repair Labor Rates by State (2026 Data)”, June 2026, from shops on Tekmetric’s platform. National average $132. Tekmetric doesn’t say whether these are posted or effective rates, or how many shops each state includes, and it publishes no D.C. figure. Median wage: Automotive Service Technicians and Mechanics (SOC 49-3023), BLS Occupational Employment and Wage Statistics, May 2025, released May 2026. U.S. median: $24.34.
*Illustrative: the state median wage plus 20% payroll taxes and benefits, divided by 75% productivity. That’s what one billed hour of that tech costs you before rent, insurance or profit. Your real numbers go in the calculator below.
A few patterns worth noticing:
- The high-wage states: California, Colorado, Massachusetts, Alaska, Connecticut, New Hampshire and Virginia all run about 17% or more above the national median. (D.C. tops the list at 36%, but D.C. is mostly parking tickets.) Shops there can’t price off a national average.
- The low-wage states: Mississippi and West Virginia run about 25% below the median. Lower costs are real, but so is the temptation to underprice. Cheaper techs don’t make cheaper rent, scan tools or insurance.
- The mismatches: Massachusetts, Minnesota and New Hampshire pay techs 15% or more above the median, yet their average shop rates sit near or below Tekmetric’s $132 national figure. If that’s your state, check your rate against your payroll before you check it against your competitors.
- The big markets: Texas, California and Florida employ the most techs. Their wages are spread out by metro, so your local market can differ a lot from the state figure.
What Affects Auto Repair Labor Rates?
Your rate is your costs plus your profit, divided by the hours you actually bill. Everything that pushes on one of those pieces pushes on your rate.
Technician pay
This is the big one, and the table above shows how much it varies. A tech’s wage isn’t their cost, though. Add payroll taxes, workers’ comp, health insurance and paid time off, and a tech often costs 20% or more above their wage before anyone picks up a wrench. The fully burdened labor rate breakdown walks through that math line by line, with a worksheet.
Productivity
You pay for every clocked hour. You only bill some of them. In the Ratchet+Wrench survey, the most common productivity band was 80 to 89%. Paar Melis, which measures against all available hours, reports 47.6%. Either way, the unbilled hours are paid for by the billed ones, and that cost lands in your rate.
Overhead
Rent, insurance, software, utilities, equipment, the parts runner’s truck. Two of those lines are worth auditing before you treat them as fixed. A renewal increase on your commercial policies raises your rate floor directly, and what auto repair shop insurance actually covers walks through that renewal audit.
Shop type and specialty
European, diesel, EV and ADAS work carries a premium because the equipment and training do. Paar Melis’s numbers put that premium near $15 an hour over the average shop.
Your market
Dense metros mean more cars and more competition. Before you raise your rate, call three competitors and a dealer and ask what they charge. It takes ten minutes and nobody has ever been arrested for it.
How to Calculate Your Ideal Labor Rate
Here’s the math, start to finish. The calculator below does it with your numbers, and the defaults are the worked example.
Step 1: Tech cost per billed hour. Take the average wage, add payroll burden, and divide by productivity.
$28/hour wage × 1.20 burden ÷ 0.75 productivity = $44.80 per billed hour
That $28 isn’t random. It’s close to the BLS national mean wage for auto technicians ($27.13).
Step 2: Overhead per billed hour. Monthly overhead divided by monthly billed hours.
$60,000 overhead ÷ 1,000 billed hours = $60.00 per billed hour
Step 3: Break-even rate. Add the two.
$44.80 + $60.00 = $104.80. Every hour you bill below this loses money.
Step 4: The rate that hits your margin. Divide the break-even rate by (1 minus your target net margin).
$104.80 ÷ (1 − 0.20) = $131.00 per hour
At $131, labor gross profit (rate minus tech cost, over rate) is 65.8%. That’s right where Paar Melis’s top-decile shops land, and well above the 59.3% average.
If this shop posts $120 today, it’s $11 an hour short. Across 1,000 billed hours, that’s $11,000 a month, or $132,000 a year, without a single extra car. (Yes, I’ll wait while you go find your billed hours report.)
Labor rate calculator
Plug in your own numbers. The defaults are the worked example below.
- Tech cost per billed hour
- $44.80
- Overhead per billed hour
- $60.00
- Break-even rate
- $104.80
- Rate that hits your margin
- $131.00
- Labor gross profit at that rate
- 65.8%
You're $11.00/hr short of your target. Across 1,000 billed hours, that's $11,000 a month.
Assumes labor carries all the overhead you enter. If parts gross profit covers some of it, enter only labor's share. Results are illustrative, not accounting advice.
One caution about overhead. The calculator assumes labor covers all the overhead you enter. Your parts gross profit carries part of the load too, so if you’d rather split it, enter only labor’s share. Shops differ on how they split it. What matters is picking a rule and sticking with it.
Your posted rate isn’t the rate you collect
The rate on the wall is a promise. The rate in your bank account is what actually happened.
Effective labor rate = total labor sales ÷ total billed hours.
Say you post $131 and bill 1,000 hours this month, but labor sales come in at $112,000. Your effective rate is $112, which means you captured 85.5% of the posted rate and $19,000 walked out the door somewhere.
That’s not a weird month. In the 2026 Ratchet+Wrench survey, the most common shop captured only 80 to 89% of its posted rate, and 14% captured less than half. The usual leaks:
- Discounts your advisors give to save a sale.
- Comebacks and warranty rework that get billed at zero.
- Diagnostic time nobody bills. 54% of shops don’t charge for diagnostic work at all (Ratchet+Wrench).
- Flat-rate jobs that run long and get sold at book time anyway.
Remember those top-decile shops charging the same $164 as the bottom decile? This is where they win. Raising your posted rate doesn’t help if your front counter discounts it right back down.
Measuring and closing that gap is its own project, and our effective labor rate guide walks through it line by line. If the hours themselves are the question (book time versus actual time), that’s in the mechanic labor time guide.
Understanding Different Types of Labor Rates
Most shops run more than one rate, whether they planned to or not.
Door rate
Your standard posted rate for general repair. It’s the number on the wall, the website and the menu board.
Diagnostic rate
Many shops charge diagnostic time at or above their door rate, because drivability, electrical, ADAS and EV diagnosis takes expensive scan tools and thinking time that doesn’t fit into book hours. More than half of shops don’t charge for it at all. If you’re one of them, that’s the first place to look for money.
Flat rate versus hourly
Flat rate bills a set price per job from book time, whether the job runs long or short. Most shops price this way because customers like the predictability. Hourly bills actual time, which is rarer because customers can’t plan for it.
How you pay a tech is a separate decision from how you bill the customer. Flat rate technician pay plans covers that side.
Is $100 an Hour Fair for Mechanic Labor?
If you’re the one charging it, it’s probably not fair to you.
Only one state in Tekmetric’s data averages as low as $100 (West Virginia), and every regional average Paar Melis reports is $157 or more. Run it through the calculator with typical numbers and $100 doesn’t even reach break-even. In the worked example above, it loses $4.80 on every hour billed, before a dollar of profit.
A $100 rate usually means one of three things:
- You’re in a genuinely low-cost market, like the states running 20% or more below the median tech wage.
- You haven’t raised your rate in years. You’re not alone: 51% of shops hadn’t raised theirs in the past two years.
- You’re pricing against the shop down the street instead of against your own costs.
Only the first one is a reason. The other two are habits.
How to Communicate Labor Rate Increases to Customers
Raising your rate feels risky. Most customers already know their own costs went up, and they assume yours did too.
Be plain about it
Skip the long apology. “Our costs for technicians, equipment and training went up this year, so our labor rate went up too.” That’s the whole speech.
Put the value next to the price
Better warranties, certified techs, faster turnaround, digital inspections with photos. Customers pay for what they can see.
Raise it a little, every year
Paar Melis puts repair cost increases near 7% a year. A $6 increase every January gets noticed a lot less than a $25 jump after four years of nothing.
Arm your service advisors
Your advisors are the ones who’ll hear about it. Give them a two-sentence script and the reason behind it, or they’ll quietly discount the increase back to zero. (See the previous section. We’ve been here before.)
Your rate is one line in a thin margin
Paar Melis’s numbers put the average shop’s net profit at 9.6% of sales. On $1 million in revenue, that’s about $96,000 kept. Real money, but thin enough that small leaks matter a lot.
That’s why your labor rate and your back office aren’t separate conversations. A perfectly calculated rate still loses to a missed vendor credit, a duplicate invoice, or a core that never got returned. Those leaks live on the parts side, and they come straight off the same bottom line.
This is the part of the business WickedFile handles. It matches every parts invoice to its repair order, checks vendor statements, and flags missed credits and uncredited cores before you pay. It doesn’t set your labor rate or fix advisor discounting. That part’s on you and the calculator above.
If you’re setting this rate for a shop you haven’t opened yet, it’s one assumption inside a much bigger document. Building a mechanic shop business plan covers where it goes. For the full revenue picture, see what an independent auto repair shop actually makes, and for the other half of your gross profit, the parts markup strategy guide.
Price it on purpose
Pull your billed hours, your payroll and last month’s overhead. Put them in the calculator. Then compare the answer to the number on the wall.
If the two match, congratulations. You can throw away the napkin.
Sources
- Paar Melis & Associates, Benchmark Report 2025 (client shops’ 2024 financials): average and regional labor rates, labor and overall gross profit, top versus bottom 10%, net profit, productivity. paarmelis.com
- Ratchet+Wrench, 2026 Industry Survey (430+ shop owners and managers, Q1 2026): posted rate bands, effective rate capture, rate increases, diagnostic charging, productivity. ratchetandwrench.com
- Tekmetric, Average Auto Repair Labor Rates by State (2026 Data), June 30, 2026 (10,000+ shops on Tekmetric’s platform): state and national average labor rates. tekmetric.com
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, SOC 49-3023 Automotive Service Technicians and Mechanics, released May 15, 2026: state and national wages and employment. bls.gov
