A fully burdened labor rate is what one hour of a technician really costs you after payroll taxes, insurance, benefits, and paid time off. (Before anybody tapes this to a toolbox: the tech isn’t the burden. The burden is everything stapled to his paycheck that he never sees.)
Most owners know the wage to the penny. Fewer know the burdened labor rate. And almost nobody takes the last step, which is dividing that cost by the hours the tech actually bills. That last step is where the real number lives.
This post is for owners and multi-shop operators who want to know what a technician costs per billed hour, and what that means for the posted rate and labor gross profit. You’ll get the formula, a fully worked example, and a worksheet you can fill in with your own payroll report.
Full disclosure: I run WickedFile. It doesn’t do payroll and it won’t calculate your labor burden. It works on the parts side of the repair order, which I’ll get to near the end, because labor cost is only half of what a job costs you. Everything below works fine with a calculator and a coffee.
What a fully burdened labor rate includes (and what it doesn’t)
The wage is the line everybody sees. The burden is the line your bookkeeper sees, spread across six different expense accounts so nobody ever has to look at it all at once.
Here’s what goes into labor burden for a repair technician:
- Employer Social Security and Medicare. The IRS sets the employer share at 6.2% for Social Security and 1.45% for Medicare, so 7.65% on top of every wage dollar. Social Security stops at the 2026 wage base of $184,500, which very few line techs will hit.
- FUTA (federal unemployment). The IRS rate is 6.0% on the first $7,000 of each employee’s wages, but a credit of up to 5.4% for paying state unemployment brings it to 0.6% after credit. That’s $42 per employee per year in most states.
- SUTA (state unemployment). Your state sets the rate and its own wage base. Check your state notice. It’s not the same number as the shop across the state line.
- Workers’ comp. Priced per $100 of payroll by class code, and auto repair is not a desk job. Your policy shows your rate. Use it.
- Health insurance. The employer share of the premium, not the total.
- Retirement match, if you offer one.
- Shop-paid extras. Tool allowance, training, ASE testing, uniforms, and anything else you pay because the tech works for you.
What it doesn’t include: rent, utilities, lifts, scan tool subscriptions, and your service advisors. That’s overhead. It’s real, and it belongs in your posted rate, but it’s a separate calculation. Our guide to setting the right labor rate for your shop walks through overhead per billed hour, and diesel shops have their own version in semi truck repair labor rates. This post stays on the technician.
One quick note on taxes. Payroll rules have more footnotes than a parts warranty, and your state adds its own. Your CPA or payroll provider owns the exact figures for your shop. This post owns the arithmetic.
Paid time off doesn’t add dollars. It removes hours.
This is the line that trips up most labor burden calculators online.
If you pay a tech $32 an hour for 2,080 hours a year, his two weeks of vacation and six holidays are already inside that $66,560. Adding PTO as a separate dollar line counts it twice.
What PTO actually does is shrink the hours he’s on the floor:
- 2,080 paid hours
- minus 80 hours of vacation
- minus 48 hours of holidays
- = 1,952 hours available to work
So PTO raises your cost per working hour without adding a dollar to the total. Same with sick days, training days, and the afternoon he spends at the DMV with his kid’s learner’s permit.
How to calculate a fully burdened labor rate, step by step
Here’s the full how to calculate labor cost sequence. Four formulas, all of them simple:
- Labor burden rate = annual burden ÷ annual wages
- Fully burdened labor rate (per paid hour) = (annual wages + annual burden) ÷ paid hours
- Burdened cost per billed hour = (annual wages + annual burden) ÷ billed hours
- Rate required for your target labor gross profit = burdened cost per billed hour ÷ (1 − target labor GP%)
Now the worked example. One illustrative technician at $32 an hour, full time. The tax lines use the IRS rates above. The insurance and extras are illustrative, so swap in yours.
| Cost line | Annual |
|---|---|
| Wages: $32 × 2,080 paid hours | $66,560 |
| Social Security and Medicare (7.65%) | $5,092 |
| FUTA (0.6% × $7,000) | $42 |
| SUTA (illustrative, varies by state) | $400 |
| Workers’ comp (illustrative, about $3 per $100 of payroll) | $2,000 |
| Health insurance, employer share (illustrative, $600/month) | $7,200 |
| Tool allowance (illustrative) | $1,200 |
| Training and ASE (illustrative) | $1,000 |
| Uniforms (illustrative) | $600 |
| Total burden | $17,534 |
| Total cost of the tech | $84,094 |
Now run the formulas:
- Labor burden rate: $17,534 ÷ $66,560 = 26.3%
- Fully burdened labor rate per paid hour: $84,094 ÷ 2,080 = $40.43
- Per hour on the floor (after PTO and holidays): $84,094 ÷ 1,952 = $43.08
- Per billed hour at 75% productivity (1,560 billed hours): $84,094 ÷ 1,560 = $53.91
Your tech makes $32 an hour. Every hour you sell of his time costs you $53.91. That $21.91 gap is the whole point of this post.
I ran this math on my seven-month-old once, mostly out of sleep deprivation. Wages: zero. Burden: formula, diapers, and every hour of sleep I used to have. Billed hours: also zero. Do not try this at home.
Productivity is the biggest line on the worksheet
Productivity here means billed hours divided by paid hours. Hold everything else still and only move that number:
| Billed hours ÷ paid hours | Billed hours per year | Cost per billed hour | Rate needed for 60% labor GP |
|---|---|---|---|
| 90% | 1,872 | $44.92 | $112 |
| 75% | 1,560 | $53.91 | $135 |
| 60% | 1,248 | $67.38 | $168 |
Same tech. Same wage. Same health plan. Thirty points of productivity moves his cost per billed hour by $22.46 and the rate you need by $56.
Be careful comparing your productivity to anyone else’s, because nobody measures it the same way. The 2026 Ratchet+Wrench Industry Survey found the most common self-reported productivity band was 80-89%. Accounting firm Paar Melis’s 2025 benchmark report, built from client shops’ 2024 financials and measured against total available hours, averaged 47.6%, with the top 10% of shops at 59.3% and the bottom 10% at 44.0%. Pick one definition, write it down, and use it every month.
If you pay flat rate, the math shifts a little. Pay tracks flagged hours, so the wage per billed hour is steadier, but guarantees, training time, and burden still land on you whether he flags or not. Flat-rate technician pay plans covers how each pay structure changes the cost side.
Full bays don’t mean profitable hours
High revenue doesn’t mean high profit, and labor is where that shows up first. A shop can have every bay full, a big labor sales number on the P&L, and still be selling hours for less than they cost to produce.
Here’s what the same $165 posted rate looks like depending on which labor cost you believe. ($165 is the cross-source average labor rate in both the Paar Melis and Ratchet+Wrench data.)
| Labor cost you use | Cost per hour | Labor gross profit at $165 |
|---|---|---|
| The wage | $32.00 | 80.6% |
| Fully burdened, per paid hour | $40.43 | 75.5% |
| Fully burdened, per billed hour | $53.91 | 67.3% |
The first number is the one owners quote. The third one is real. And that assumes you collect the full $165, which most shops don’t. If you capture 85% of your posted rate after discounts and comebacks, you’re collecting $140.25, and labor gross profit drops to 61.6%. That gap between posted and collected is its own topic: see effective labor rate.
Now scale it. A six-tech location billing 1,560 hours per tech sells 9,360 hours a year. The difference between “he makes $32” and “he costs $53.91 per billed hour” is $21.91 × 9,360 = $205,078 a year in real cost the wage-only view never sees.
The good news runs the other direction too. Move those six techs from 60% to 75% productivity and you add 1,872 billed hours a year without adding a dollar of payroll. At $165, that’s $308,880 in labor sales from the same people. Paar Melis’s top-decile shops charged about the same rate as the bottom decile. They just billed more of the hours they paid for.
Only 62% of shops factor loaded expenses into their labor cost, according to the Ratchet+Wrench survey. If you’re in the other 38%, the worksheet below is your Saturday.
Your fully burdened labor rate worksheet
Pull last year’s payroll report, your workers’ comp policy, your health insurance invoices, and billed hours per tech from your shop management system. Fill in one column per technician.
| Line | How to get it | Example | Your number |
|---|---|---|---|
| A. Annual wages | Payroll report, or hourly × paid hours | $66,560 | |
| B. Social Security and Medicare | A × 7.65% | $5,092 | |
| C. FUTA | 0.6% × first $7,000 (if full credit) | $42 | |
| D. SUTA | Your state rate × state wage base | $400 | |
| E. Workers’ comp | Policy rate per $100 × (A ÷ 100) | $2,000 | |
| F. Health insurance | Employer share × 12 | $7,200 | |
| G. Retirement match | Plan statement | $0 | |
| H. Tool allowance | Your policy | $1,200 | |
| I. Training, ASE, certifications | Receipts | $1,000 | |
| J. Uniforms | Vendor invoices | $600 | |
| K. Total burden | B through J | $17,534 | |
| L. Total cost | A + K | $84,094 | |
| M. Labor burden rate | K ÷ A | 26.3% | |
| N. Fully burdened rate per paid hour | L ÷ paid hours | $40.43 | |
| O. Billed hours | Shop management system | 1,560 | |
| P. Cost per billed hour | L ÷ O | $53.91 | |
| Q. Rate needed for 60% labor GP | P ÷ 0.40 | $135 |
Then compare line Q to what you actually collect, not what’s on the wall. If Q is higher, your rate or your productivity has a problem, and the productivity table above tells you which one is cheaper to fix.
Run it per location, not as one company average. Workers’ comp, SUTA, and health plans can differ by state, and productivity differs by building. Put line P on each location’s monthly report next to labor gross profit. If one store’s cost per billed hour is $10 higher than the others, you’ll know where to spend your next Tuesday.
A burdened labor rate is half of real job cost
Once you know your fully burdened labor rate, you know what the labor side of every repair order really costs. That’s half the job. The other half is parts, and parts cost is just as easy to get wrong for a completely different reason: the number on the RO isn’t always the number on the vendor’s invoice, and the credit you were promised isn’t always the credit you got.
Here’s an illustrative RO:
- Labor: 3 billed hours at $165 = $495. Tech cost at $53.91 per billed hour = $161.73. Labor gross profit: $333.27.
- Parts: sold for $400, cost $216. Parts gross profit: $184 (46%, right at Paar Melis’s 46.1% parts GP average).
- Total RO gross profit: $517.27 on $895 = 57.8%.
Now the $45 core on that job never gets credited. Parts gross profit drops to $139. RO gross profit drops to 52.8%. One missing core took five points off the job.
Put it in labor terms. You make $111.09 of gross profit on every billed hour ($165 − $53.91). That $45 core erased about 24 minutes of billed labor profit. Your tech did the work. The paperwork gave it back.
Owners who just finished the burdened labor worksheet tend to stop there, because it felt like the hard part. It’s the half you can calculate from your own payroll. The parts half depends on vendors, returns, and statements, and it doesn’t stay put. For the full picture, see parts vs labor margin in auto repair and where core charge money leaks.
Where WickedFile fits (and where it doesn’t)
WickedFile works on the parts side of that RO. It does not touch the labor side.
What it reads: your parts invoices, credit memos, and vendor statements, scanned or uploaded. It pulls repair orders from your shop management system, entries from QuickBooks Online, and bank and card transactions through Plaid.
What it flags:
- Cores and returns with no matching credit memo.
- Credits issued but not applied on the statement.
- Parts bought for a repair order that never got sold on it.
- Parts sold below cost or outside your pricing matrix.
- Statement lines and card charges with no supporting invoice.
What it doesn’t do: it doesn’t run payroll, calculate labor burden, track technician time, or set your labor rate. It isn’t a shop management system, it doesn’t replace QuickBooks or your bookkeeper, and it isn’t a payment processor. The worksheet above is yours to fill in. WickedFile won’t do it for you.
How to use the free trial on this: you get 500 scanned pages, no credit card. Take last month’s invoices, credit memos, and statements from your two biggest parts vendors and run them through. Then put whatever it finds next to the “24 minutes of labor profit per missing core” math above, using your own numbers. After the trial, the Grow plan is $299 a month, flat. If you buy from two vendors and track every core on a whiteboard someone actually checks, you may not need it, and I’d rather you know that.
See what your parts invoices are hiding →
The short version
Add up everything a tech costs you beyond the wage. Divide it by the wage to get your labor burden rate. Divide the total by paid hours for the fully burdened labor rate, then by billed hours for the number you should actually price from. Do it per tech and per location, once a year and any time insurance renews.
Then go do the parts half. Your tech already knows what he costs per hour. It’s only fair that you know too, and unlike him, you don’t get paid time off for the math.
